Insights / Engineering
Designing fast charging for a 50°C summer
Heat is the quiet enemy of charging speed and uptime. What changes when you design for Gulf afternoons instead of European averages.
A fast charger is, among other things, a heater. Even at around 95% efficiency, a 360 kW charger running flat out has to shed roughly 18 kW of heat. On a mild day that's easy. On a 48°C July afternoon, with sun on the cabinet and hot air rising off the asphalt, it's the main engineering problem.
What heat does to a charger
Power electronics protect themselves. When internal temperatures climb, a charger reduces its output, which is called derating. A charger sold as 240 kW may deliver noticeably less in extreme heat, or shut down to protect itself. Drivers experience this as a charger that is “slow” exactly when it is busiest.
The car matters too. Batteries prefer moderate temperatures, and in strong heat a vehicle's own thermal management may limit how fast it accepts charge. We can't control the car, but we can make sure the charger isn't the bottleneck.
How we design for it
- Ask for the derating curve. We don't accept a headline kW figure. We ask suppliers for output against ambient temperature and choose equipment that holds its rating in Gulf conditions.
- Cool the cable, not just the cabinet. At high currents, cables get hot and heavy. Liquid-cooled cables keep them manageable and safe at high power.
- Keep the sun off. Canopies over dispensers and screens cut surface temperatures and protect displays, and they make the stop bearable for drivers.
- Plan for dust. Fine sand clogs filters and heat exchangers. Enclosures of IP54 or better, filtered air paths and maintenance schedules that change filters more often in dusty months.
- Split where it helps. On high-power sites, split systems put the power cabinets in a ventilated, shaded spot, away from the dispensers drivers use.
- Watch it remotely. Internal temperature is one of the signals we monitor. Rising temperatures are often an early sign of a blocked filter or failing fan.
Why it starts in Shenzhen
Manufacturers in Shenzhen build for many climates, and their export product lines differ widely in how well they cope with heat. Checking thermal design, cooling components and test data at the factory, before an order, is much cheaper than discovering a problem in August.
Our rule is simple: specify for the worst afternoon of the year, not the average day. A charger that performs at 50°C will perform everywhere else.
